Music Industry How To is supported by readers. When you buy via a link on our site, we’ll possibly earn an affiliate commission at no additional cost to you.
Hardware is a critical part of a drummer’s rig.
You’ve got to have the right tools for the job, as you can’t have your expensive gear falling on you, breaking on you, or not functioning as needed.
Cymbal stands and boom arms carry some of the load in a drummer’s setup, as they hold cymbals in place and allow you to arrange them where and how you want them, and at what height.
In this guide, we look at the best cymbal stands and boom arms for your drum set.
Best Cymbal Drum Stands & Boom Arms
In this section, you’ll find some of the best overall drum stands and boom arms. And they are all highly rated and reasonably priced.
For general everyday use, these cymbal holders have held up to scrutiny.
Let’s get into it!
Best Choice: DW DWCP3700 Cymbal Boom Stand
A solid entry via DW, the DWCP3700 cymbal boom stand comes with a fine-tooth tilter with captive wing nut. It also features a full-size heavy-duty 1” double braced tripod base, and hinged memory locks for precision adjustments.
This sturdy stand can carry the load of heavier cymbals. Users thought it was solid and sturdy, and some even said it was better than DW stands(!).
There were some users, however, that found the stand too tall. They were in the minority though, but be sure to look up the specs and ensure it’s workable for you before purchase.
Item weight: 8.78 lbs.
Package dimensions: 29 x 5 x 5 inches
PDP By DW PDCB800 800 Series Boom Cymbal Stand
The PDP PDCB800 boom cymbal stand comes with double braced legs, and oversized rubber feet. It’s a solid medium weight stand for general applications.
It also comes with a fine-toothed tilter, contoured wing screws, and standard gauge tubing.
Buyers generally thought it was a good stand for the price, and said it was sturdy too.
Others thought it was just okay, and even said it was flimsy. Some didn’t like that it didn’t come with memory locks either.
Item weight: 6.5 lbs.
Package dimensions: 4 x 4 x 26 inches
Gibraltar 4709 Boom Cymbal Stand
Here we have an average, ordinary looking cymbal stand in the form of the Gibraltar 4709.
This stand comes with hinged height adjustments, nylon inserts for no metal-to-metal contact, and “G” style pedal board design.
In addition, it features a low-mass, double-braced construction and is lightweight besides.
Many reviewers thought it was worth every penny, but some thought it was about average overall.
Item weight: 6.06 lbs.
Package dimensions: 4 x 4 x 26 inches
Pearl BC150S Boom Cymbal Stand
The Pearl BC150S boom cymbal stand is a lightweight and portable stand with a low-profile flush-base design (can be converted to a traditional tripod base). It also features a uni-lock gearless tilter for slip-free performance at all angles.
As well, the boom tilter can convert the stand into straight positioning. Reversible felt/foam cymbal washers are also included.
Most buyers liked the stand and thought it was well made and easy to handle.
There was one user who pointed out that you probably shouldn’t use this stand for anything other than a crash or splash. It wasn’t accommodating of heavier cymbals. This could be something to look out for if you’re thinking about buying this stand!
Item weight: 5 lbs.
Package dimensions: 4 x 4 x 25 inches
Gibraltar 5709 Medium Weight Boom Cymbal Stand
The Gibraltar 5709 boom cymbal stand promises to be a great stand for the gigging drummer. It features low mass, double-braced tripod for stability, round rubber feet, hinged height adjustment with nylon collar inserts, dual-point hideaway boom tilter, and geared cymbal tilter.
Most buyers thought it was strong, sturdy, and great value. Some thought it was just decent for the price though.
Item weight: 8 lbs.
Package dimensions: 4 x 4.7 x 22.8 inches
Pearl C830 Straight Double Braced Cymbal Stand
The Pearl C830 straight cymbal stand comes with uni-lock, steel washer, wing nut/vinyl tube feet, nylon bushing joint, and double braced legs.
There are a couple of straight stands on this list, including this one. That said, there are still options if you want to add a boom arm (more on this later). Just so you know!
And this is a Pearl quality stand that many users found sturdy, compact, solid, and affordable.
Some said it was a little lighter than they expected, but it wasn’t a major detractor for them.
Item weight: 2.2 lbs.
Package dimensions: 23 x 4 x 5 inches
Gibraltar 4710 Straight Cymbal Stand
The Gibraltar 4710 straight cymbal stand is another straight option with hinged height adjustment, nylon inserts for no metal-to-metal contact, and new “G” style pedal board design.
It’s also lightweight and features a low-mass, double braced construction.
Users unanimously agree – this is a solid stand, especially for the price!
We couldn’t find any negative reviews for the Gibraltar 4710.
Item weight: 5.15 lbs.
Package dimensions: 4 x 4 x 26 inches
Mapex C200RB Rebel Entry Level Straight Cymbal Stand, Double Braced
The Mapex C200RB Rebel is a lightweight stand that comes with double braced legs and a Mapex mirror chrome finish. Slick!
Many buyers thought it was a good product at a good price.
Some said it wasn’t overly sturdy, but they were in the decided minority. Then again, at this price, how much can you expect?
Item weight: 4.19 lbs.
Package dimensions: 30 x 4 x 4 inches
Luvay Boom Cymbal Stand, Single Braced Lightweight
The Luvay boom cymbal stand is a modest lightweight choice, with single-braced legs, large rubber feet, felt pad, as well as a foldable and trident design tripod. Basically, it’s a budget option (but still a good one).
Some said that it was great for the price and even thought it was sturdy. But overall, the reviews for the product are mixed. Although there weren’t any major complaints from negative reviewers, they didn’t think it was heavy duty. Which is probably the case, just so you know.
Item weight: 4.4 lbs.
Package dimensions: 25.75 x 4 x 3.5 inches
Mapex B200RB Rebel Entry Level Cymbal Boom Stand, Double-Braced
The Mapex B200RB Rebel is an entry level stand if you couldn’t already tell from the product name.
It features a lightweight construction, double braced legs, Mapex mirror chrome finish, and is made to withstand constant setup and teardown.
Most buyers thought it was a solid stand. But it got its share of middle of the road reviews too, with some saying it’s only good for beginners or practicing. Being that it’s a budget option, that should not come as a surprise.
Item weight: 5.05 lbs.
Package dimensions: 25 x 4 x 4 inches
Gibraltar SC-CLBAC Long Cymbal Boom Attachment Clamp
Now here’s an entry that could come in handy if you’ve got a straight stand but would like to add a crash or splash to it. This can be space-saving and efficient.
The Gibraltar SC-CLBAC boom attachment clamp is 18” in length, 12.7mm in diameter, and comes with a dual tilter multi clamp to help you adjust the position and angle of your cymbal.
So, if you’re looking to save some space and cut down on clutter in your kit, this might be for you.
This is a highly rated cymbal attachment clamp, and users said it was strong, versatile, and a good space saver.
Some buyers said the clamp tends to wear down over time. Once set in place, it might be best to keep it on your cymbal stand instead of constantly removing and reattaching it.
Item weight: 8.8 ounces
Package dimensions: 4 x 5.4 x 2 inches
Best Cymbal Drum Stands For Metal Music
As a metal drummer, you might have different expectations in terms of durability.
In general, the need for higher quality gear depends a lot on how you play. Some drummers play hard. Some have more finesse. And metal drummers aren’t necessarily the most aggressive (but they can be!).
Truth be known, you probably don’t need anything out of the ordinary, even as a metal drummer.
That said, we think these are the best choices if you think you need something more.
DW DWCP9701 Boom Cymbal Stand
Here’s a sturdy, upper end choice that should work for just about any hard hitter. You can tell from its appearance that the DW DWCP9701 boom cymbal stand has got some serious girth and stability to it.
This baby comes with cymbal seat adjustment, so you can quickly lock your cymbal into place and adjust movement. The toothless tilter with techlock is what allows for unprecedented, secure adjustment possibilities.
It also comes with integrated memory lock and heavy-gauge tubing.
Trusted by professionals everywhere. Its only downside is probably that it’s the most expensive cymbal stand on this list.
Reviewers were almost unanimous in their praise of this stand and liked its quality as well as heavy duty durability.
Item weight: 11.85 lbs.
Package dimensions: 33 x 5 x 5 inches
DW DWCP5710 Straight Cymbal Stand
The DW DWCP5710 straight cymbal stand comes with a fine-tooth tilter and captive wing nut, 1 1/8” double braced tripod base, and plastic tube insulators inside the heavy gauge tubing. This makes this stand perfect for recording, as it cuts down on unwanted rattling.
Even if that doesn’t make any sense, it sounds like it would be solid, right?
Well, we couldn’t find a single user who didn’t like it, and some said they would willingly pay twice the price for this kit. Wow.
Item weight: 9.56 lbs.
Package dimensions: 29 x 5 x 5 inches
What Should I Look For In Cymbal Stands & Boom Arms?
In this guide, you will find some of the highest quality gear available. Some products aren’t quite as good as others, but as they say, you get what you pay for. And we always like to highlight a few budget options just in case you’re a beginner or you’re looking to practice at home.
The three criteria that matter most when it comes to selecting cymbal stands and boom arms are:
We cover each of these factors in more detail below.
Obviously, you want your gear to hold up to some abuse. Drum hardware can be quite heavy. That being the case, anything you lug around should be able to handle some bumps and knicks.
How you’re planning to use the stand makes some difference though. If you plan to keep your drumkit set up in one location, then you may not need the utmost quality. But if you plan to gig or even tour, obviously your expectations would be different.
The overall quality of the stand, as well as locks, tilters, and other components of course play a part.
If in doubt, check the reviews or ask around.
Does the stand stay in place? Is it sturdy enough that it doesn’t fall over? Are the components durable enough that they don’t fall apart?
Stability is especially important to performing drummers since they need their setup to function as expected. Even beginners need their gear to be reliable.
The overall stability of a stand can certainly impact your purchasing decision, as it should. We’ve done our best to point out potential problems with certain products in this guide, but you can also check the reviews for additional information.
Products on this list are somewhere in the $30 to $160 range, and in most cases, shouldn’t break the bank.
But if you need multiple stands and additional gear, of course hardware can add up.
So, here’s a quick reminder to spend according to your budget. Don’t go overboard. Don’t overspend or go into debt. Spend based on your budget or save up for what you need.
What Are The Best Boom Arm Brands?
In this section, we’ll take a quick look at the best cymbal stand and boom arm brands.
When it comes to drumming gear and hardware, the best brands tend to be those who are renowned for quality kits as well.
Here are the best brands making drum hardware.
Known in most musician and drumming circles as DW (or DW Drums), Drum Workshop Inc. makes quality drum products across the board – drums, pedals, hardware, accessories, and more.
The company was founded in 1972 in Santa Monica, CA, and they even own Gibraltar Hardware (next on the list).
On their artist roster, some of the most well-known drummers include Roger Taylor, Dave Grohl, and Sheila E.
Gibraltar or Gibraltar Hardware was founded in 1993 and has Drum Workshop (previous on the list) as their parent organization. No wonder the bar is high for their products.
They focus almost exclusively on hardware, racks, and parts for drummers.
On their artist roster you will find people like Chris Adler, Van Romaine, Taylor Hawkins, and many others.
Pearl or Pearl Drums is a Japanese manufacturer and was originally founded on April 2, 1946. They are headquartered in Yachiyo, Chiba, Japan.
The long-running Pearl makes a ton of drum related products – drum sets, electronics (such as drum modules or MIDI mallets), snares, hardware, drum pedals, percussion, and more.
Some well-known Pearl artists include Calvin Rodgers, Julie Davila, Matt Halpern, Miguel Lamas, Ray Luzier, and Gary Husband.
Mapex or Mapex Drums is a Taiwanese brand. It was originally founded in 1989 in Taipei, Taiwan.
Mapex makes everything from drum sets and snares to hardware and accessories.
Their artist roster includes the likes of Chris Adler, Tony Coleman, Aaron McVeigh, and others.
Best Cymbal Stands & Boom Arms, Final Thoughts
With all the information detailed here, finding your perfect cymbal stand and/or boom arm should prove a cinch.
Just keep in mind that you’re looking for a stand that’s durable and stable and is also within your budget. If you do, you should end up with a product you love.